-4%

LAUNCH X431 PAD V All-in-One Automotive Scan Tool

£2,299.00 £2,218.00

2022 TOP-END car diagnostic scan tool-LAUNCH X431 PAD V,same functions as LAUNCH X431 PAD VII, X431 Throttle,x431 TAB II

The era when car maintenance special inspection is king is gone, the powerful universal car decoder function gradually replaces and even surpasses the original factory special inspection.Launch X431 PAD V is launch flagship automotive diagnostic tool.100% Original.it supports online programming models up to 14 major car series and NO IP LIMITED!launch x431 pad v is the newly developed high-end comprehensive diagnostic equipment with charging,have same function as the LAUNCH X431 PAD VII,X431 Throttle,x431 TAB II,autel ms909.upgrade of LAUNCH X431 PRO5.

D-PDU/DoIP/J2534/RP1210 & CAN FD Protocols Supported

J2534 / RP1210 Diagnostic Protocols Cover More Vehicle Type,you can perform OE-level diagnosis and online programming for more accurate diagnosis and efficient car repair jobs to win more business! not like other scanner need to download the OEM software from the manufacturer’s.our x431 pad v supports online programming,which is no need to subscribe expensive original software, but perform the same programming functions as original equipmen.


More advanced than J2534 tools: with 3 diagnostic protocols (D-PDU/SAE J2534/RP1210), not only J2534 tools, PAD V also supports online programming, only X431 tools above PAD V level support, other J2534 tools only support J2534 programming. The LAUNCH X431 PAD V covers all the functions of the launch x431 pro5 and is an upgraded version of the x431 pro 5(doesn't support online programming function)


Supports PEV ( pure electric vehicle ),our x431 pad v scan tool diagnose gasoline vehicles & 24V Diesel Trucks/buses/trailers/excavators/diesel engine/construction machinery/pick-up/etc.ONLY NEED TO purchase the HD software,no need the HD module. save more money. other launch x431 device do not supports Hybrid cars.


3 diagnostic modes: Intelligent Diagnostics, Local Diagnostics, and Remote Diagnostics.

 

TPMS Diagnostic Function:
LAUNCH X431 PAD V utomotive scan tool can work with wireless tire pressure diagnostic to achieve the features of TPMS activation, programming and learning.

((NOTE: Need to be purchased separately)) a)Activation:to activate the sensor's lD, wheel pressure, sensor frequency, tire temperature and battery status. b)Programming:to program sensor data to a blank sensor, so as to replace a sensor that is in low battery and does not function properly. There are three sensor programming methods available:automatic, manual, and via activation replication. c) Learning:to write the sensor ID into the vehicle ECU for sensor identification

AutoAuth for FCA Vehicles


For the vehicle equipped with SGW (Security Gateway) module, you can lend a hand from LAUNCH X431 PAD V car tools to login the FCA account and perform the functions such as clearing DTCs, bi-directional tests, and calibrations. Compatible with Fiat, Chrysler, Alfa Romeo, etc..(this function is free to use in US)

High-end Configurations:All in one auto diagnostic and maintenance solution.improve your work efficiency.


Designed with Android 9.0 OS, Qualcomm 8-core processor, 35568mwh Battery,10.1 inch captive touch screen,Docking & charging station included with QC3.0 Quick Charge technology.2.4GHz&5GHz Dual-Frequency Wi-Fi,free adjustment of nearly 180 degrees; support three modes of hanging, support and normal.


Support commercial vehicle and passenger car diagnose, Support J2534, CAN FD, DoIP.Wide mode coverage, powerful and a large number of diagnostic functions, and accurate test data.Support 1 Year Free Update.

 

ECU ONLINE PROGRAM + OFFLINE PROGRAM +J2534 PROGRAM (NO IP LIMITED)

With smartbox 3.0, launch x431 pad v can compliant to D-PDU, SAE J2534 & RP1210 to update OEM software, replace the existing software/ firmware in ECU, fix ECU parameter loss, programming new ECU and fixing software-controlled drivability issues and emission issues.much more advanced than J2534 programming tools.other J2534 tool doesn't support ONLINE PROGRAMMING (J2534 programming ≠ ONLINE Programming.X431 PRO 5 doesn't support online programming funtion.
Program data to a new module/Reprogram existing data to the used module/Repair ECU with data loss/Upgrade ECU software version


How to Unlock the ONLINE PROGRAMMING FUNCTION?

Click Local Diagnose menu>Choose Porsche model>Find the online function>No online programming function on the menu
Go back to the main menu>Click other Modules>Click the Bulit-in apps above>Click files>Click lntrnal Storge>Click cnlaunch folder
Click X-431 PADV folder>Click assets folder>Drop down to find the StdCfg.ini file>Click on the “ES Note Editor” file manager
Drop down>Find OnlineFlash and Flash>Select the Edit option in the upper right corner>Start to change data
Change OnlineFlash=0 to OnlineFlash=1>Change Flash=0 to Flash=1>Save it after modification.>Go back to the diagnostic menu to get the online programming function


Why is the LAUNCH X431 PAD V more powerful than other J2534 tool?

X-431PAD V online programming does not require an expensive online account, just connect to WIFI, saving maintenance costs.
smartbox adopts dual WIFI communication to improve programming speed, thereby reducing the possibility of programming errors
When using J2534 tool, in addition to the connector, it is also necessary to consider issues such as adapting the computer, installation costs, and complete functions, which is not cost-effective.
launch x431 PAD V is equipped with SmartBox,can support J2534 protocol, and is compatible with SAE J2534-1 (2004) and SAE J2534-1 (2006) flashing standards.
ONLINE PROGRAMMING FUNCTION WORK FOR

 

2022 Version LAUNCH X431 PAD V Diagnostic Tool Supports More than 50 special Reset functions.( Keep growing with UPDATES)


1.Oil Lamp Reset Service:perform reset for a new calculation of Engine Oil Life system once changed the oil.

2.EPB Reset:Help replace and reset the brake pad. 3.BAT battery service(BMS):Clear the fault information of low battery and make it match again

4.DPF service 5. SAS Steering Angel Sensor Reset:Reset the steering angle to zero to keep the car running straight.

6.IMMO Key Programming(Anti-theft Matching): Disable any lost keys and add new keys. **ONLY for cars with easy IMMO system.

7. ABS Bleeding: Help exhaust the air.8. Fuel Injector Coding: Write the new injector code into the car system for correct cylinder injection quantity.

9. TPMS service: Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

10. Throttle Adaptation: Initialize the throttle actuators to the default state. 11. AFS Headlamp Reset: Initialize the adaptive headlamp system.

12. Sunroof Initialization: The sunroof needs to be reset when the sunroof control unit has communication problem or changed.

13. Suspension Reset:Adjust the vehicle body height sensor for level calibration.14. Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality.15. Gear Learning: Monitors certain camshaft position sensors signals.16.Tire Reset:Set the size parameters of the modified or replaced tire. 17.A/F Reset:Set or learn Air/Fuel ratio parameters.18.Adblue Reset(Diesel Engine Exhaust Gas Filter): Reset urea after the diesel exhaust treatment fluid is replaced or filled up.19.Coolant Bleeding:Activate the electronic water pump

20.Language Change:Change vehicle system language.21.Nox Sensor Reset:Reset catalytic converter learned value stored in ECU. 22.Stop/Start Reset:Set up the automatic start-stop function in ECU23.Seat Calibration:Calibrate the memory in replaced or repaired seats.

24.Transport Mode:Deactivate the transport mode.25.Windows Calibration:Perform door window matching to recover ECU initial memory.

26.AC System Relearn/Initialization,27.High Voltage Battery Diadnosis.28.GPF regeneration.29.Reset Fuel Alcohol Level.30.Reset Fuel Trim. 31.VGT Reset,32.Reset Fuel Trim etc,.(all functions are depending on the specific car models, not for all cars)

 

NEW OPTIONAL FUNCTIONS (option functions):

1.X431 ADAS Mobile/PRO:When the adaptive cruise control module (ACCM), radar sensor or front bumper has been replaced or does not meet the maintenance calibration requirements, you need to perform "radar calibration" on your vehicle.


2.VSP600-Videoscop: helps technicians to check issues on unreachable area in a vehicle. With 6 levels light strength, technicians can easily adjust the brightness according to the environment.


3.LAUNCH X431 TSGUN: a professional tire pressure diagnostic tool that integrates TPMS sensor activation, reading, learning and pro-gramming. It activates reading tire pressure information by receiving signals at low or high frequencies. Check for abnormal conditions in time to prevent tire pressure problems.


4.X-PROG & X-PROG3 Immobilizer: turn this X431 diagnostic scanner into a capable IMMO service tool, providing fast, easy, and intuitive k-ey pro-gramming for VAG group vehicles with 2/3/3.5 gen. IMMO, and most Asian cars with low-level antitheft systems; also to have completed IMMO & K-ey Pro-gramming (read & write 1200+ EEPROM and MCU chips, etc.) for VW/Audi/Skoda/Seat models manufactured after 2008 with 4/5/5.5/6 gen. IMMO system.


5.X431 PRINTER: Print out diagnostic data/ reports


6.O2-1 ScopeBox, Oscilloscope: to quickly acquire the circuit signal, and slowly display the waveform for better data analysis.


7.BTS360 Bluetooth Battery Tester: to get a thorough test of the vehicle battery.

Guided Function for VAG vehicles

LAUNCH X431 PAD V car scan tool provides step-by-step repair guidance for technicians.the function of guiding the use of the product to prevent the car setting caused by wrong operation.Compatible with VAG series vehicles(Volkswagen / Audi / Skoda / Seat etc.)


IMMO Keys

With the IMMO Keys function, LAUNCH X431 PAD V can add new keys, disable/clear information of the lost vehicle keys, and program the replacement key fob for most Asian and American vehicles, which come with low-grade anti-theft systems. Note: this function varies on the car model and the year.

Read Pin~code
Add New Keys (Fob/Smart)
Remote Learning
Key Matching
ALL-KEYS-LO*ST, etc.
NOTE: this function does not work on all cars, please check the compatibility before purchase.

 

Launchx431online.com is the official website of Shenzhen Kerui United Technology Co., Ltd., Which is the online agent authorized by Launch.

Launch Official Authorized Files

Launchx431online.com offers free shipping in US/EU/UK.
Note: If you buy from launchx431online.com to a UK or EU address, you will be charged $50 for shipping. UK/EU free shipping, please visit the EU, UK website to buy.
EU website: https://eu.launchx431online.com
UK website: https://uk.launchx431online.com

1. Delivery time
Order processing time: After receiving the order, it will be processed within 1-2 working days. The order processing deadline for the day is 3 pm GMT+8:00. Usually, it may take 3 to 7 working days for the parcel to arrive in most countries or your place. Orders placed over the weekend may experience delays.

The parcel will be sent out from US/EU/UK local warehouse, It will match the nearest warehouse shipment according to your order address. At the same time, an informed e-mail will be there in your e-mail box once the parcel is out. The tracking number inside is to trace the timely status of parcel.

Country Estimated Delivery Time Item Price Shipping Fee Courier
United States 3-5 working days / Free Shipping DHL, UPS, FedEx, and EMS
United Kingdom 3-5 working days / 50.00 USD DHL, UPS, FedEx, and EMS
Canada 5-7 working days / 50.00 USD DHL, UPS, FedEx, and EMS
Spain 5-7 working days / 50.00 USD DHL, UPS, FedEx, and EMS
Europe 5-7 working days / 50.00 USD DHL, UPS, FedEx, and EMS
Germany 3-5 working days / 50.00 USD DHL, UPS, FedEx, and EMS
France 5-7 working days / 50.00 USD DHL, UPS, FedEx, and EMS
Other Countries 5-7 working days 0.00 - 100.00 USD 20.00 USD DHL, UPS, FedEx, and EMS
101.00 - 500.00 USD 30.00 USD
501.00 - 1000.00 USD 50.00 USD
≥ 1001.00 USD 100.00 USD

 

The shipping time is up to multiple factors, like the destination country, custom, weather and so on, which is really hard to control. This is what we are working on all the time to make it better and improved. Asking for forgives for any inconvenience.

2. Cancel the order

If you contact us promptly after purchasing, we can cancel your order for you. If your payment has been completed but your package has not been shipped, you may cancel your order before the item ships. We will refund your money in full.
Please note that the order cannot be canceled once the package has been shipped.

3. About tax

In rare cases, an order may be charged customs fees by your government rather than our website, and you will be responsible for paying these fees. We apologize for any inconvenience caused, but we have no control over the customs authorities in your country or any other country. Please contact your local customs office for more information on customs fees, duties and taxes.

Any question, be free to contact us , and we will get back to you in the first chance!
Thank you all for your concern and support!

Company: Shenzhen Kerui United Technology Co., Ltd.
Company address:Room 201, 2nd Floor, Building E, Zhongwu Logistics Park, Xixiang Street, Baoan District, Shenzhen, China
Website: https://www.launchx431online.com
Tel: (+86)180 2870 0839

 

We accept return within 30 days from the receipt of your order to return goods you bought from Launchx431online.com (Except Launch Software Update Service).


We promise to obey the return refund policy when the item has the problem below but you must send back the item, after knowing your problem and what you want us to do.

A. For all returns you have an obligation to contact us to request an RMA number (return merchandise authorization number). We accept return within 30 days from the receipt of your order to return goods you bought from us ( Except Software Update Service). You can contact us at anytime by using our online chat or emailing us with your return request. Contacting us first is very important. Why? Because unidentifiable packages shipped to our warehouse may become lost or returned to you as unaccepted. So please talk to us before shipping back any product. We are always happy to issue an RMA to any customer that requests one.

B. For any product that has a quality problem: If the product never works or was damaged during shipment, we will issue you a 100% refund. We may request you to return the product to analyze the exact nature of the problem. If we request a return shipment, please make sure to retain all the original shipping packaging. It will take 5-7 working day to receive the package. After we receive the item, we will refund you within 3 working day. The refund can be received within three (3) business days.

C. For returns caused by customers’ wrong/duplicate purchase or inappropriate operation on the products, we may charge a restocking and handling fee. Upon return of the product will promptly issue you an 80% refund of the purchase price. It will take 5-7 working day to receive the package. After we receive the item, we will refund you within 3 working day. The refund can be received within three (3) business days.

D. For any miss-shipped items (lost items, wrong item or incomplete item), we will pay all the shipping and related fees. We will give you the choice of returning the product for exchange or refund. Please contact us in time. Please provide the picture of the packing list on the outer package and the picture of the product. Once we confirm the package is not shipped or we send the wrong product, we will ship the new product or refund you within 5 working day.

E. Refund requests may be refused if our QC staff determines that a clients’ carelessness caused a fault in the product. Nonetheless, you can always return a product for replacement or repair. However, in these cases, there will be a required payment for the back and forth shipping fees.

F. Important note about return packages, if any return package does not meet our the requirements stated in items A-E, then all the shipping charges are the buyer’s responsibility.

Notice for shipping options when return full refund: After you confirm the return item with us and we issue you an RMA number, please use regular airmail or EMS to return it. Make sure to use the shipping address our customer service provides. DO NOT USE DHL, UPS, FEDEX or TNT. Why? Because we cannot get your return item if you send anything to us via these methods, and then we cannot give you a refund or exchange.

 

Company: Shenzhen Kerui United Technology Co., Ltd.

Company address: Room 201, 2nd Floor, Building E, Zhongwu Logistics Park, Xixiang Street, Baoan District, Shenzhen, China

Website: https://www.launchx431online.com
Tel: (+86)180 2870 0839
Email: service@launchx431online.com

LAUNCH X431 PAD V All-in-One Automotive Scan Tool
You have successfully subscribed!
This email has been registered
ico-collapse
0
Recently Viewed
ic-cross-line-top
Top
ic-expand
ic-cross-line-top